Sunday 23 September 2012

How to fix a hole in the wall

OK so you punched a hole in your drywall, or you used it for target practice.Whatever the case it's not cool to have a gaping hole staring at you, it will always look ugly and you will always have people commenting and pulling at it.

Reasons to fix a hole in the wall

1)Every time you see it you get bleak
2)Every time your friends see it they ask you what happened and you get bleak
3)Your mom gets bleak
4)Your landlord gets bleak and charges you.

So now how the heck do we go about fixing that hole in the wall?

Method 1

You will need the following.
Scraper/putty knife
Sandpaper
Paint
Patching compound
Wall texture spray
Wall hole repair
paintbrush
wet sponge


Method

1) Remove any loose flakes around the edges of the hole
IMAG0007.jpg
IMAG0009.jpg
2) Sand an area around the hole for your patch to stick too.

3) Stick the drywall patch over the hole.Sometimes you might need to wet the patch a little for it to stick.If not you will need to use some of the patching compound.
IMAG0011.jpg

4) Continue to use the patching compound about 10 inches or 30cm around in diameter,this will when sanded  be able to give the impression that the wall is flat.
IMAG0013.jpg
5)It would be a good idea to wait about 20 to 30 minutes for the patching compound to dry,maybe go have a coffee or a beer.


IMAG0014.jpg
Sand till flush.
6)Once dry you can start sanding the compound till almost flush with the wall,please remember that it wont be 100% flat so if you sand to much you might sand all the compound away.Wipe clean with a cloth and wait another 15 minutes to dry.
IMAG0015.jpg

7)Take your texture spray and depending on the cans instructions spray the sanded area,generally you hold the can about a foot away from the wall and spray.Remember to leave it to dry over night before painting with even strokes to finish.
IMAG0019.jpg
Finished Product
So hopefully you will now know how to fix a hole in the wall.